Share this product

Teleflex SSC154 Series TFXtreme Rack Steering Cable 26' SSCX15426

This product ad may change over time

Share

Teleflex SSC154 Series TFXtreme Rack Steering Cable 26' SSCX15426

Teleflex SSC154 TFXtreme Rack CablesTeleflex TFXTREME premium cables have a heavy jacket and a splined, coated core element for maximum smoothness with minimal lost motion. (4" min. bend radius). Back HDPE outer casing for durability and best resistance to UV and chemicals. Cables meet/exceed all applicable industry standards.C…

New content will be added above the current area of focus upon selection

Teleflex SSC154 TFXtreme Rack CablesTeleflex TFXTREME premium cables have a heavy jacket and a splined, coated core element for maximum smoothness with minimal lost motion. (4" min. bend radius). Back HDPE outer casing for durability and best resistance to UV and chemicals. Cables meet/exceed all applicable industry standards.Can be used in place of SSC134 cables with SH5230P helms.Fits: SH5210P, SH91610P, SH5230P and SH91630P helms.How to Measure Steering Cables "Measure Twice. Order Once."Replacement of Existing Cable: If possible, find the part number stamped on the plastic jacket of the old cable. If you removed the old cable, measure for the replacement cable as follows:For Rack Steering Cable Replacement, Measure Existing Cable as follows: Measure plastic cable jacket ("Y" dimension shown in above drawing) in inches, add 30", and round up to next foot. Order that length cable.New Installation: Measure cable routing path from wheel center line to engine connection, as follows: A = Center line of wheel to gunwale (or deck, if routed downward), B = Dash to transom, C = Gunwale to centerline of cable connection at centered tiller.For Cable Installations through the Engine Tilt Tube: Add A, B & C + 6", then round up to the next foot. Order that length cable.For Cables Mounted to Transom, Splashwell or Stringer: Add A, B & C, then subtract 6" and round up to the next foot. Order that length cable.TYPICAL SINGLE STATION ROUTINGA single-cable, starboard drive push-pull mechanical cable system is shown in this diagram. If your mechanical system is different than the one depicted and/or you have any questions about mechanical steering after reviewing this guide, please contact Teleflex (Mechanical) Technical Service at (610)-495-7011 or www.teleflexmarine.comCable routings (such as those found on pontoon boats) may vary from this drawing. Confirm length by laying a garden hose or similar object) along cable path and measure run from wheel to engine connection point.

See more below

w

wholesalemarine

$225.49

Visit site

Description

Teleflex SSC154 TFXtreme Rack CablesTeleflex TFXTREME premium cables have a heavy jacket and a splined, coated core element for maximum smoothness with minimal lost motion. (4" min. bend radius). Back HDPE outer casing for durability and best resistance to UV and chemicals. Cables meet/exceed all applicable industry standards.Can be used in place of SSC134 cables with SH5230P helms.Fits: SH5210P, SH91610P, SH5230P and SH91630P helms.How to Measure Steering Cables "Measure Twice. Order Once."Replacement of Existing Cable: If possible, find the part number stamped on the plastic jacket of the old cable. If you removed the old cable, measure for the replacement cable as follows:For Rack Steering Cable Replacement, Measure Existing Cable as follows: Measure plastic cable jacket ("Y" dimension shown in above drawing) in inches, add 30", and round up to next foot. Order that length cable.New Installation: Measure cable routing path from wheel center line to engine connection, as follows: A = Center line of wheel to gunwale (or deck, if routed downward), B = Dash to transom, C = Gunwale to centerline of cable connection at centered tiller.For Cable Installations through the Engine Tilt Tube: Add A, B & C + 6", then round up to the next foot. Order that length cable.For Cables Mounted to Transom, Splashwell or Stringer: Add A, B & C, then subtract 6" and round up to the next foot. Order that length cable.TYPICAL SINGLE STATION ROUTINGA single-cable, starboard drive push-pull mechanical cable system is shown in this diagram. If your mechanical system is different than the one depicted and/or you have any questions about mechanical steering after reviewing this guide, please contact Teleflex (Mechanical) Technical Service at (610)-495-7011 or www.teleflexmarine.comCable routings (such as those found on pontoon boats) may vary from this drawing. Confirm length by laying a garden hose or similar object) along cable path and measure run from wheel to engine connection point.

Specifications

Application	Steering cable
Brand	Teleflex
Cable Length	26'
Compatibility	SH5210P, SH91610P, SH5230P and SH91630P helms
Control Type	Push-pull
Drive Type	Starboard drive
Features	Heavy jacket, splined, coated core element, HDPE outer casing, UV and chemical resistance, industry standards compliance.
Function	Steering cable replacement or installation.
Installation	Through the engine tilt tube or mounted to transom, splashwell or stringer.
Length	26'
Material	Plastic, metal.
Mounting	Tiller, transom, splashwell or stringer.
Protection	UV and chemical resistance
Purpose	Steering cable replacement or installation.
Size	26'
Steering System	Rack steering system
Style	TFXtreme Rack Cable
Type	Steering cable